To the main site nadinmacht.deDeutsch

New release · Software

PancakeSlicer: free slicer for smooth, curved top surfaces on regular 3D printers

The slicer lays the top layers along the shape of the model instead of flat. That is meant to avoid stair-stepping on curved surfaces.

Curved top surfaces always show stair-stepping in regular 3D printing because every layer is flat. The new, free PancakeSlicer by Zimeng Xiong (YouTube channel Alpaca Engineering) tackles this: it prints the base flat and lays the top layers curved along the model’s surface. Hackaday and Tom’s Hardware report on it.

How it works

According to Hackaday, the slicer offers three approaches: a flat base with a few curved top layers, a structure with gradually varying layer thickness, and a mode with a flat base, a transition zone and constant-thickness curved layers on top. The last is meant to prevent layers from becoming too thin in narrow areas. Where the toolhead does not have enough clearance for a curved path, the slicer falls back to flat layers.

PancakeSlicer is designed for regular three-axis printers, and Xiong demonstrated it on a Bambu Lab A1 mini. How much curvature is possible depends heavily on the toolhead: without the fan shroud and with external cooling, much more is possible. According to Tom’s Hardware, the slicer can be self-hosted.

Non-planar printing is still new territory. Anyone trying it should check the paths carefully in the preview so the toolhead does not collide with the model.

Sources

  1. Hackaday (Bericht, 15.11.2026)
  2. Tom's Hardware (Bericht, 15.11.2026)